Series
200 High Power Apertures have handled up to 200 MW/CM 2. The
substrates material is a newly developed alloy that has been
used to spatially filter a 20 watt argon laser beam when approached
properly.* Purposely a thin substrate of.ooo5 inch thickness
is used resulting in lower laser power loss. Dustproof re-useable
packages are supplied with each order. |
| CAT# |
HIGH
POWER PINHOLE DIAMETERS |
| PH-2010 |
10
micron +/- 1 micron |
| PH-2015 |
15
micron +/- 1 micron |
| PH-2020 |
20
micron +/- 2 micron |
| PH-2025 |
25
micron +/- 3 micron |
| PH-2035 |
35
micron +/- 4 micron |
| PH-2050 |
50
micron +/- 5 micron |
| PH-2060 |
60
micron +/- 6 micron |
| PH-2070 |
70
micron +/- 6 micron |
| PH-2080 |
80
micron +/- 6 micron |
| PH-2090 |
90
micron +/- 6 micron |
| PH-20100 |
100
micron +/- 10 micron |
| PH-20200 |
200
micron +/- 10 micron |
|
Series
30 Air Slits are available from 25-500 micron slit width. Each
slit is micro machined in a 3/8 inch (9.5mm) diameter disc .0005
(13um) thickness with a slit lenght of 3mm. Tolerances are plus
or minus 10% or better. |
| CAT# |
SLIT
WIDTH (MICRONS) |
(INCHES) |
| AS-3005 |
5 |
.0002 |
| AS-3010 |
10 |
.0004 |
| AS-3025 |
25 |
.0010 |
| AS-3050 |
50 |
.002 |
| AS-3075 |
75 |
.003 |
| AS-30100 |
100 |
.004 |
| AS-30200 |
200 |
.008 |
| AS-30300 |
300 |
.009 |
| AS-30400 |
400 |
,010 |
| AS-30500 |
500 |
.012 |
| NOTE:
Custom lenghts, widths and thicknesses available. Consult our
sales facility for detailed information. |
|
